Cách giải rubik master pyraminx 4x4

The Master Pyraminx is a well-known adaptation of the immensely popular Pyraminx. First conceived in 2002, the Master Pyraminx was, until recently, a collector’s thắng lợi, as the original designer only created a handful of them in 2006. However, as of năm 2016, there is now a mass-produced edition by ShengShou. This puzzle is often referred khổng lồ as the 4x4 Pyraminx, as its increase in kích thước is similar to lớn that of the 4x4 in comparison to the 3x3 Rubik’s Cubes.

Bạn đang xem: Cách giải rubik master pyraminx 4x4

*

Overview

A lot of the solution for the Master Pyraminx is based on concepts learnt from solving the original Pyraminx. The Pyraminx is really easy to lớn solve sầu, so it is imperative that you know how lớn vì so before you start with this tutorial.

This tutorial will also require basic knowledge of how certain moves affect different pieces on the puzzle, which can be acquired by playing around with a Pyraminx & seeing what you can vì.

The steps required lớn solve the Master Pyraminx are as follows:

Solve the 3 edge centres on each side.Adjust the top layers và the tips.Solve the actual centres.Solve sầu the top three edges.Solve the bottom six edges.Solve sầu the last middle three edges.

*
The notation for the Master Pyraminx will be done in a similar way khổng lồ the notation for a regular Pyraminx, except with an extra layer. Knowledge of standard Rubik’s Cube and/or Pyraminx notation is required:

U, L, R, B – These moves reference the top sections of the puzzle (indicated on the image in green).Uw, Lw, Rw, Bw – These moves reference the top two layers of the puzzle (excluding tips) (indicated on the image in blue)u, l, r, b – These moves reference the tips of the puzzle (indicated on the image in purple)

Tutorial - How to lớn solve sầu the Master Pyraminx

*
The first step involves solving the 3 edge centres on each side. This refers lớn the three pieces highlighted by the image. This can be done in the same way as solving the edges on a standard Pyraminx (in the first step of the Pyraminx solution), however instead of where you would bởi U, L, R and B moves on the standard Pyraminx, you bởi Uw, Lw, Rw and Bw moves. You should be able khổng lồ bởi vì this without any help, considering that you already know how to lớn solve centres in this way on a smaller puzzle.

*
Once you have sầu the first three centres solved, you can complete the rest of the centres for the puzzle. This is, once again, an intuitive stage. Think of this lượt thích solving the tips on a regular Pyraminx. The tip is either solved or requires a U or U’ move sầu lớn solve sầu. Just bởi vì the same here so the yellow highlighted pieces match in colour with the pieces you solved earlier.

Finally, you can adjust the tips. This can be done in the exact same way as the above sầu step (i.e. the same as the tips on a regular Pyraminx), but using u, l, r and b moves this time. The tips are highlighted in purple.

*
The last step of the overall centres section involves solving the actual centres on the puzzle (i.e. the piece in the exact centre of each face). This piece is highlighted in White on the adjacent image. There are three different cases for the centre pieces:

All 4 solvedAll 4 unsolved1 solved, 3 unsolved

If you have sầu all 4 centres solved, then you can skip this stage but rethành viên it for later if you try lớn solve it again & come across a case that requires an algorithm.

If you have all 4 centres unsolved, then the algorithm lớn solve them is very simple. The centres will be swapped in pairs, for example the yellow and xanh centres will be on the blue and yellow sides etc. Simply place one of these centres on the front face & the other on the bottom face (this will place the two other unsolved centres on the baông xã faces) & persize this algorithm: (Rw’ Lw Rw Lw’). Do this algorithm three times lớn solve the centres.

Xem thêm: 25 Mẫu Trang Trí Sinh Nhật Đẹp Hot Nhất 2021, Dịch Vụ Trang Trí Sinh Nhật Tại Nhà Tphcm

*
If you have sầu only 1 centre solved, then hold this centre on the left of the puzzle. Then perkhung this algorithm: (Rw Uw Rw’ Uw). Do this algorithm twice. If the centres are still not solved, bởi it another two times.

Now this section is done, the pieces highlighted in the adjacent image should be solved on your puzzle. This entire section is the equivalent of solving the three centres on each side & the tips on a regular Pyraminx.

*
The remaining edges are solved in three parts:

Top three edgesBottom six edgesMiddle layer edges (white)

The image shows the edges referred to above (text colour = edges).

The majority of the edge solving section is intuitive sầu. It should be solvable using what you know about Pyraminx edge movement, but here is a short overview for each section that explains how you should go about it:

The concept of pieces and slots

*
When solving the edges of the bottom layer of a standard Pyraminx, you most likely use a method that involves inserting pieces into their slots. The solved centres determine the slots and the stickers on the pieces determine the pieces. Moves are made that specifically preserve what is already made. For example, if you wanted to get Piece A into lớn Slot B, you would have sầu to lớn do a specific set of moves. The simplest way would be by doing U’ R’. This would place the edge, but it would misplace Centre C. To avoid misplacing the centre, you need to lớn insert the edge into the slot between the two pieces, not just in the position. This can be done by doing R U’ R’. The R move sầu at the start brings the slot khổng lồ the same layer as the piece, which allows for the piece khổng lồ replace the one in the slot.

This is what is meant when the concept of moving the slot lớn insert the piece.

Likewise, on the Master Pyraminx, the slots in the top of the puzzle have sầu lớn be moved khổng lồ insert the pieces. You can insert the pieces by doing wide moves khổng lồ place them in the top layer. If the piece you’ve sầu placed in the top layer is flipped, then it is not the right piece. It is important to rethành viên that there are two edges instead of one (just like the 4x4 in comparison to lớn the 3x3), so these need lớn be differentiated between.

You can persize a wide move khổng lồ insert the first edge piece in its correct slot (the centres pieces on the top layer determine the correct slot), then vì chưng a U or U’ to lớn move sầu the slot out of the way, then invert the wide move sầu to restore the centres. This will leave sầu you with one solved edge on the top layer (one edge between two centres that match the edge stickers) và every centre back in its original place. The same thing can be done for the second edge, but for the third edge you need khổng lồ utilise the concept of moving the slot to insert the piece. It’s not possible to lớn simply move sầu the piece inkhổng lồ the top layer, because there are no empty slots in the top layer to lớn replace it with. Therefore what you can bởi vì instead is bởi vì the same wide move but in the opposite direction khổng lồ bring the slot down khổng lồ the piece, insert the piece inkhổng lồ the slot, & move the slot baông chồng khổng lồ its original position.

Note: It doesn’t matter how many setup moves you vì chưng in order khổng lồ get the correct edge into lớn position to be moved up as long as you unbởi all of the moves in order afterwards.

The same concept is applied with the bottom layer edges. Simply rotate the puzzle so that your bottom face is now the front face (this should move sầu the solved top layer khổng lồ the baông chồng of the puzzle, out of the way). This will give sầu you a new top layer. You only have lớn solve the two edges facing toward you at this point (i.e. the edges that are on the bottom of the puzzle when it is upright). After these are solved using the same style of solving as for the original top layer, rotate the puzzle so that you still have the same face pointed towards you but so that you have sầu two more unsolved edges on the new top layer. The rotation is shown in the images below. Do this once more and you’ll have sầu all 6 bottom layer edges solved, so you can rotate the puzzle bachồng (put the bottom face baông chồng on the bottom of the puzzle).

*

Finally, all that remains unsolved are the middle three edges. There are only three cases for this, & only one algorithm required. There are two ways in which the edges can be cycled, or the edges can be solved. If they are solved, then you’re already done. However, if they need to lớn be shifted, then vày the following algorithm from any orientation with the three edges to be solved in the middle layer: (R U R’ U). Do this algorithm twice. If the puzzle is not solved, then vì chưng it two more times. Your puzzle will now be solved.

Leave a Reply

Your email address will not be published. Required fields are marked *

  • Snake tattoo hình xăm rắn hổ mang xamnghethuat88

  • Hình ảnh xe raider độ

  • Lò nướng homepro có tốt không

  • Tây du ký 18+

  • x

    Welcome Back!

    Login to your account below

    Retrieve your password

    Please enter your username or email address to reset your password.